Sprayable, high penetrating cavity wax Sikagard-6220 is an amber coloured, durable wax with very good rust-proofing properties. It is suitable as an effective protection against corrosion in vehicle body cavities and convinces with its outstanding application properties and very good final performance. Thanks to its very high creep capability, it protects even hardly accessible areas and tight sheet intervals.
After drying, a brown, slightly sticky wax coating remains that protects cavity areas from corrosion. - Very good creep capability making easy application even at colder temperatures
- Excellent film building properties
- Outstanding water displacing
- Good low temperature behavior
- Heat resistant
- No hazing during application
- Permanently elastic
- Lower solvent content
- High road salt resistance
|
PRODUCT BENEFITS - Very good creep capability making easy application even at colder temperatures
- Excellent film building properties
- Outstanding water displacing
- Good low temperature behavior
- Heat resistant
- No hazing during application
- Permanently elastic
- Lower solvent content
- High road salt resistance
Usage Sikagard-6220 is a spray applied anti-corrosion coating for repair and protection of concealed areas of vehicles such as cavities of door skins, side panels, motor hoods, trunks, rear wing, sills, cross members and pillars.
The product can be sprayed haze free, able to penetrate finest hairline cracks but does not drip through drainage holes.
Sikagard-6220 shows very good adhesion on different paints, metal primers, metals and PVC without any pre-treatment.
This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. |
Typical Product Data| Chemical base | | Wax solution | | Colour (CQP001-1) | | Amber | | Cure mechanism | | Air-drying | | Density (uncured) | | 0.87 kg/l | | Solid content (CQP002-1) | | 53 % | | Application temperature | | 15 ─ 25 °C | | Film thickness | wetdry | 100 µm 50 µm | | Drying time | | 3 h A | | Service temperature | | -50 ─ 75 °C | | Shelf life | | 24 months B |
| CQP = Corporate Quality Procedure | A)23 °C / 50 % r. h. B)storage between 5 °C and 25 °C |
|
Technical Information CHEMICAL RESISTANCE Sikagard-6220 is resistant against water, seawater, salt spray, oil, soft bases and acids. The above information is offered for general guidance only. Advice on specific applications will be given on request.
|
Application Information Surface Preparation Surfaces must be clean, dry and free of rust, dust and grease. Bare metal must be pre-treated to enhance corrosion resistance (e.g. uncoated steel, etc). Application Sikagard-6220 can be applied by light airless spray equipment or by air-mix guns with an air pressure of approx. 3 - 6 bar. Use either the Sika CW Gun (pressure cup type) or the Sika UBC+ Gun (vacuum type) to apply the product. Shake can approx. 40 times before use. Cover adjacent surfaces prior the spray process. Spray at room temperature and from a distance of approx. 25 cm on the surface or in the cavity using a flexible hose. Use the existing or drill access points in the car body. Spray a continuous coat and do not spray on parts of the brake, engine or exhaust system. Removal Uncured Sikagard-6220 can be removed from tools and equipment with Sika Remover-208 or another suitable solvent. Once dried, the material can only be removed mechanically. Hands and exposed skin shall be washed immediately using hand wipes such as Sika Cleaner-350H or a suitable industrial hand cleaner and water.
Do not use solvents on skin. Overpainting Sikagard-6220 cannot be overpainted. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
