Sikalastic Rapid Pigmented Sealer, PMMA-Based Pigmented Sealer, Interior & Exterior
SIKA
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read more| Two component, PMMA based, pigmented sealer resin Sikalastic Rapid Pigmented Sealer is used as a wearing layer for Sikalastic Rapid Trafficable systems. It is a high-grade, mechanically durable finish. Different toppings can be applied to achieve the desired slip-resistant properties.
| ||||||||||||||||||||||||||||||||||||||||
Usage
Advantages
Packaging
Please see Curing Details section for more information ColourPigmented Liquid RAL 7032 (Pebble Grey) RAL 7043 (Dary Grey) Available in most other RAL colours subject to a minimum order quantity | ||||||||||||||||||||||||||||||||||||||||
Application Information Ambient Air Temperature -5 °C min. / +30 °C max. Relative Air Humidity The relative humidity must be ≤90% Dew Point Beware of condensation. Surface temperature during application and cure must be a minimum of 3°C above dew point. The substrate temperature must not be less than +3°C if a topping is applied to the surface. Reaction problems can occur at lower temperatures. Substrate Temperature +3 °C min. / +40 °C max Substrate Moisture Content The surface to be coated must be dry and ice-free. Pot Life The material in opened containers should be applied immediately. At 20°C, 2% catalyst the pot life is approximately 15 minutes Applied Product Ready for Use
Note: Times are approximate and will be affected by changing ambient conditions. Higher temperatures or greater proportions of Sikalastic Rapid Catalyst will reduce reaction times, while lower temperatures and smaller proportions of Catalyst will increase reaction times. The following table indicates the recommended amount of Sikalastic Rapid Catalyst required to adjust the curing reaction to the temperature. Substrate temperature in °C; required amounts of Sikalastic Rapid Catalyst in % w/w (guide)
Return-to-service times are provided as a guide only and may vary as a result of conditions. Newly installed balconies should be protected from exposure to heavy traffic by overlaying with an appropriate protective covering. This is particularly critical where early access is needed by other construction related traffic. Sika Liquid Plastics will not be held responsible for damage to balcony surfaces that results from failures to adequately protect newly laid areas. For further advice, consult Sika Liquid Plastics Technical Customer Services. |