| Sikagard-405 W is a single component white, waterborne acrylic resin based coating containing an organic in-fim-preservative with a mid-sheen finish - Good resistance to repeated cleaning and disinfection regimes, using mild detergents and cleaning solutions
- Tough and highly durable
- Good covering and hiding power (opacitiy)
- Permeable to water vapour
- Ultra low emission
- Odourless
- Seemless, easy to clean finish
- Easy to apply
- Mid-sheen finish
|
Usage - Top coat or stand alone coating for internal walls and ceilings
- For concrete, bricks, cement based and gypsum substrates, metallic surfaces, timber, tiles and plastic
- Suitable for pharmaceutical, medical engineering, food & Beverage industry, hospitals, healthcare facilities, prisons and leisure facilities
Advantages - Good resistance to repeated cleaning and disinfection regimes, using mild detergents and cleaning solutions
- Tough and highly durable
- Good covering and hiding power (opacitiy)
- Permeable to water vapour
- Ultra low emission
- Odourless
- Seemless, easy to clean finish
- Easy to apply
- Mid-sheen finish
Packaging 5.0 litres = 6.60 kg drums
15.0 litres = 19.80 kg drums Colour Available colours BS08B15, BS12B21, BS14C31, BS18E49, BS18E50, RAL1013, RAL3015, RAL7035, RAL9001, White |
Technical Information Tensile adhesion strength ≥ 1.5N/mm² to concrete with Sika Bonding Primer | (ISO 4624) |
Chemical Resistance Good short term resistance to mild acids, alkalis, cleaning agents and disinfectants. Please contact local Sika Technical service for specific information. Disinfection with Hydrogen Peroxide Vapor: - Resistant when using STERIS VHP technology
- Resistant to PEA vaporisation technology according Test report PEA
- Resistant when using Oxypharm vaporiser NOCOSPRAY with the following set-up:
Disinfectant | Concentration | Setting at vaporiser | Contact time | | NOCOLYSE Mint (6%) | 1 ml/m³ | 20m³ (1.5 min vaporisation) | 30 min | | NOCOLYSE ONE Shot (12%) | 3 ml/m³ (2cycles) | 45m³ (5 minutes vaporisation) | 30 min | | NOCOLYSE Food (7.9%) | 1 ml/m³ | 20m³ (1.5 minutes vaporisation | 30 min | | NOCOLYSE Food (7.9%) | 5 ml/m³ | 75m³ (5 minutes vaporisation) | 60 min |
Permeability to Water Vapour ~51.5 g/m² in 24 hours | (EN ISO 7783-1:2011) |
|
Application Information Ambient Air Temperature +8°C - +35°C Relative Air Humidity 80% max. Dew Point 3 °C above dew point
Beware of condensation Substrate Temperature +8°C - +35°C Curing Time Before applying Sikagard-405 W to Sikagard-405 W allow: Substrate Temperature | Minimum | Maximum | | +10°C | 4 hours | 7 days | +20°C | 2 hours | 7 days | | +30°C | 1 hour | 7 days |
Before applying Sikagard-405 W to Sikagard-403 W allow: Substrate Temperature | Minimum | Maximum | | +10°C | 4 hours | 7 days | +20°C | 1 hours | 7 days | | +30°C | 1 hour | 7 days |
Applied Product Ready for Use Temperature | Tack free | Full cure | | +10°C | 8 hours | 7 days | +20°C | 4 hours | 7 days | | +30°C | 3 hours | 7 days |
|
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
