| Sikafloor-3000 is a two part, aliphatic, solvent free, very low VOC emission certified, elastic, self-smoothing polyurethane resin. - Very low VOC emission
- Solvent free
- Comfortable
- Footwarm
- Reduces footfall sound
- Permanently elastic
- Good mechanical resistance
- Very high yellowing resistance
- Decorative designs possible using coloured chippings etc.
- Easy to apply
- Low maintenance finish
|
Advantages - Very low VOC emission
- Solvent free
- Comfortable
- Footwarm
- Reduces footfall sound
- Permanently elastic
- Good mechanical resistance
- Very high yellowing resistance
- Decorative designs possible using coloured chippings etc.
- Easy to apply
- Low maintenance finish
Packaging | Part A | 15.0 kg containers | | Part B | 5.0 kg containers | Part A+B | 20.0 kg ready to mix units |
Colour | Resin - part A | coloured, liquid | | Hardener - part B | transparent, liquid |
Available in Steely Glimpse, Amberish Grey, Brilliant Blue, Sea Mist, Sky Line, Spring Grass, Concrete Grey, Latte Macchiato, Light Ivory, Black, Frosty Tree, Sweet Citrus, Sunfire, Brown Beige, Bordeaux Wine.
Note: With bright colours such as yellow , orange etc., colour variations may occur |
Technical Information Shore Hardness Shore A: ~ 84 (14 days / +23°C) | (DIN 53505) |
Tensile Strength ~ 6.0 N/mm² (14 days / +23°C) | (DIN 53504) |
Tensile adhesion strength > 1.5 N/mm2 (failure in concrete) | (EN 13892-8) |
Tear Strength ~ 18 N/mm (14 days / +23°C) | (ISO 34-1) |
Chemical Resistance Sikafloor-3000 always has to be sealed with Sikafloor-304 W. Therefore, refer to chemical resistance chart of Sikafloor-304 W.
|
Application Information Mixing Ratio Part A : part B = 75 : 25 (by weight) Layer Thickness Sikafloor-3000 is typically installed at 2,8 kg/m² giving a 2 mm nominal thickness. Product Temperature +15°C min. / +30°C max. Ambient Air Temperature +15°C min. / +30°C max. Relative Air Humidity 80% r.h. max. Dew Point Beware of condensation!
The substrate and uncured floor must be at least 3°C above dew point to reduce the risk of condensation or blooming on the floor finish. Substrate Temperature +15°C min. / +30°C max. Substrate Moisture Content < 4% pbw moisture content.
Test method: Sika-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet). Pot Life Temperatures | Time | +10°C | ~ 120 minutes | +20°C | ~ 90 minutes | | +30°C | ~ 45 minutes |
Applied Product Ready for Use Temperature | Foot traffic | Light traffic | Full cure | +10°C | ~ 30 hours | ~ 48 hours | ~ 6 days | +20°C | ~ 16 hours | ~ 24 hours | ~ 4 days | +30°C | ~ 12 hours | ~ 18 hours | ~ 3 days |
Note: Times are approximate and will be affected by changing ambient conditions. Refer to the System Data Sheets of the Sikafloor-PS24 system (Sika Comfortfloor Decorative) and Sikafloor-PS26 system (Sika Comfortfloor Decorative Pro) for information on systems being ready for use. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
