2-part, PUR elastic, low VOC, self-smoothing wearing course for Sika Comfortfloor Systems Sikafloor-3310 is a two-part, solvent free, elastic, self-smoothing, aromatic PUR resin. - Very low VOC emission.
- Solvent free.
- Permanently elastic.
- Good mechanical resistance.
- Reduces contact sound.
- Easy to apply.
- Low maintenance finish.
- Can be filled with quartz sand.
|
Usage - Elastic smooth wearing course for the Sika Comfortfloor Systems.
- Particularly suitable for hospitals, schools, sales premises, showrooms, entrance halls, lobbies, open-plan offices, museums, etc.
- For interior use only.
Advantages - Very low VOC emission.
- Solvent free.
- Permanently elastic.
- Good mechanical resistance.
- Reduces contact sound.
- Easy to apply.
- Low maintenance finish.
- Can be filled with quartz sand.
Packaging | Part A | 15.8 kg containers | | Part B | 4.2 kg containers | | Part A+B | 20.0 kg ready to mix units |
Colour | Resin - part A | Coloured, liquid | | Hardener - part B | Light brown, transparent, liquid |
Available in RAL 1014, RAL 2000, RAL 3009, RAL 5015, RAL 6010, RAL 7042, RAL 8002, RAL 9001, RAL 9005.
The colour of the Sikafloor-3310 has to be approximately adjusted to the colour of the Sikafloor-305 W seal / top coat.
Applied colours selected from colour charts will be approximate. For colour matching: Apply colour sample and confirm selected colour under real lighting conditions.
When product is exposed to direct sunlight, there may be some discolouration and colour variation, this has no influence on the function and performance of the floor finish. |
Technical Information Shore A Hardness | ~84 (14 days / +23 °C) (unfilled) | (DIN 53505) |
Tensile Strength | > 6.0 N/mm² (14 days / +23 °C) (unfilled) | (DIN 53504) |
Tensile adhesion strength | > 1.5 N/mm2 (failure in concrete) | (EN 13892-8) |
Tear Strength | ~20 N/mm (14 days / +23°C) (unfilled) | (ISO 34-1) |
Chemical Resistance Sikafloor-3310 always has to be sealed with Sikafloor-305 W. Therefore, refer to chemical resistance of Sikafloor-305 W.
|
Application Information Mixing Ratio Part A : part B = 79 : 21 (by weight) Layer Thickness Film thickness unfilled ~2.0 mm at 2.80 kg/m²
Film thickness filled ~2.0 mm at 3.40 kg/m² Refer to the respective System Data Sheet. Product Temperature +15 °C min. / +30 °C max. Ambient Air Temperature +15 °C min. / +30 °C max. Relative Air Humidity 80 % r.h. max. Dew Point Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish. Substrate Temperature +15 °C min. / +30 °C max. Substrate Moisture Content < 4 % pbw moisture content.
Test method: Sika-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet). Pot Life | Temperature | Time | | +10 °C | ~24 minutes | | +20 °C | ~18 minutes | | +30 °C | ~15 minutes |
Curing Time Before overcoating Sikafloor-3310 allow: | Substrate temperature | Minimum | Maximum | | +10 °C | 21 hours | 72 hours | | +20 °C | 15 hours | 48 hours | | +30 °C | 12 hours | 36 hours |
Applied Product Ready for Use | Temperature | Foot Traffic | Light Traffic | Full Cure | | +10 °C | ~21 hours | ~72 hours | ~10 days | | +20 °C | ~15 hours | ~60 hours | ~7 days | | +30 °C | ~12 hours | ~48 hours | ~5 days |
|
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
