Chat
Shop
Sign in
0 Wishlist
  • Products
  • Sikafloor Comfort Porefiller, 2-Part Elastic Pu Resin for Comfortfloor Applications, Interior, Grey, 20 Kg

Sikafloor Comfort Porefiller, 2-Part Elastic Pu Resin for Comfortfloor Applications, Interior, Grey, 20 Kg

Product Code: PTG259.00099
Share

Sikafloor Comfort Porefiller, 2-Part Elastic Pu Resin for Comfortfloor Applications, Interior, Grey, 20 Kg

Product Code: PTG259.00099
Share
Sika
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read more

Sikafloor Comfort Porefiller, 2-Part Elastic Pu Resin for Comfortfloor Applications, Interior, Grey, 20 Kg

This combination does not exist.

Add to RFQ RFQ
    Product Image
    Sikafloor Comfort Porefiller, 2-Part Elastic Pu Resin for Comfortfloor Applications, Interior, Grey, 20 Kg

    0.00 € without VAT 0.0 EUR

    1.00 lei

    Add to Cart

    2-COMPONENT PUR PART OF THE SIKA-COMFORTFLOOR FLOORING RANGE

    Sikafloor-Comfort Porefiller is a two-part, total solid, low VOC, PUR used for sealing and levelling.

    • Good bonding properties
    • Low VOC
    • Non flammable
    • No shrinking after curing
    • Easy to apply
    Usage
    • Is a durable high quality compound used for sealing and levelling of the permeable surface of prefabricated granular rubber sheets.
    • Particularly suitable for hospitals, schools, sales premises, showrooms, entrance halls, lobbies, open-plan offices, museums, etc.
    • For interior use only.
     
    Advantages
    • Good bonding properties
    • Low VOC
    • Non flammable
    • No shrinking after curing
    • Easy to apply
    Packaging

    Part A:

    16 kg containers

    Part B:

    4 kg containers

    Part A+B:

    20.0 kg ready to mix units
    Colour

    Resin - part A:

    light grey, liquid

    Hardener - part B:

    brown, transparent, liquid
    Technical Information
    Tensile Strength

    ~ 5.0 N/mm² (14 days / +23°C)

    (DIN 53504)
    Application Information
    Mixing Ratio

    Part A : part B = 80 : 20 (by weight)
    Ambient Air Temperature

    +10°C min. / +30°C max.
    Relative Air Humidity

    80% r.h. max.
    Dew Point

    Beware of condensation!
    The substrate and uncured floor must be at least 3°C above dew point to reduce the risk of condensation or blooming on the floor finish.
    Substrate Temperature

    +10°C min. / +30°C max.
    Substrate Moisture Content

    < 3% pbw moisture content.
    Test method: Sika-Tramex meter, CM - measurement or Oven-dry-method.
    No rising moisture according to ASTM (Polyethylene-sheet).
    Pot Life

    Temperatures

    Time

    +10°C

    ~ 36 minutes

    +20°C

    ~ 20 minutes

    +30°C~ 12 minutes
    Curing Time

    Before overcoating Sikafloor-Comfort Porefiller allow:

    Substrate temperature

    Minimum

    Maximum

    +10°C

    12 hours

    72 hours

    +20°C

    8 hours

    60 hours

    +30°C

    6 hours

    48 hours

    Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
    Applied Product Ready for Use

    Substrate temperature

    Foot traffic

    Full cure

    +10°C

    12 hours

    72 hours

    +20°C

    8 hours

    60 hours

    +30°C

    6 hours

    48 hours

    Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.

     

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Preview TDS
    Download TDS
    General Specifications
    Packaging Part A: 16 kg; Part B: 4 kg; Part A + B: 20.0 kg ready to mix unit
    Chemical Base PUR
    Usage Sealing and levelling compound for rubber sheet surfaces
    Application Method Roller or trowel
    Usage Area Interior
    Color Grey
    Ambient Air Temperature +10 °C min. / +30 °C max.
    Storage Conditions The packaging must be stored properly in original, unopened and undamaged sealed packaging, in dry conditions at temperatures between +5°C and +30°C.
    Curing Time +10°C 12 hours; +20°C 8 hours; +30°C 6 hours
    Working Time +10°C ~ 36 minutes; +20°C ~ 20 minutes; +30°C ~ 12 minutes
    Density Mixed resin: 1.30 kg/L
    Consumption 0.4 kg/m²
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products