2-part epoxy floor coating for multi-purpose use Sikafloor-267 is a 2-part coloured epoxy resin. It provides a hard wearing, smooth gloss finish, or a slip resistant finish when broadcast with aggregates. Varying thicknesses can be achieved from 0,6 mm to 3,0 mm. It is suitable for medium to heavy wear conditions. - Suitable for indoor applications due to low odour
- Multi-purpose product - can be used in many different kinds of applications
- Resistant to many chemicals
- Impermeable to liquids
- Abrasion resistant
- Slip resistant
- Can be filled with sand to produce a self-levelling coating
- High mechanical resistance
|
Usage The Product can be used as a: - Roller coating
- Textured coating
- Self-levelling coating
- Seal / Top coat for slip resistant broadcast systems
Advantages - Suitable for indoor applications due to low odour
- Multi-purpose product - can be used in many different kinds of applications
- Resistant to many chemicals
- Impermeable to liquids
- Abrasion resistant
- Slip resistant
- Can be filled with sand to produce a self-levelling coating
- High mechanical resistance
Packaging | Container Part A | 25,5 kg | | Container Part B | 4,5 kg | | Container Part A + Part B | 30 kg |
Colour | Part A | coloured liquid | | Part B | transparent liquid |
Note: When the product is exposed to direct sunlight, there may be some discolouration and colour variation. This has no influence on the function and performance of the coating. Available colours are limited. Please contact Sika Customer Services for availability. |
Technical Information Abrasion Resistance | ~37 mg (CS10 / 1000 g / 1000 cycles) | (EN ISO 5470-1) |
Compressive Strength | ~56 N/mm² (Resin filled with 70 % quartz sand 0,1–0,3 mm, after 7 days) | (EN 13892-2) |
Flexural Strength | ~28 N/mm² (Resin filled with 70 % QS 0,1–0,3 mm, after 7 days) | (EN 13892-2) |
Tensile adhesion strength | > 1,5 N/mm² (failure in concrete) | (EN 1542) |
Thermal Resistance | Short-term, maximum 7 days | +60 °C |
Chemical Resistance Laboratory defined resistance to many individual chemicals. Before proceeding contact Sika Technical Services for specific information.
|
Application Information Mixing Ratio | Part A : Part B (by weight) | 85 : 15 |
Product Temperature | Minimum | +10 °C | | Maximum | +30 °C |
Ambient Air Temperature | Minimum | +10 °C | | Maximum | +40 °C |
Dew Point Beware of condensation. The substrate and uncured applied product must be at least +3 °C above dew point to reduce the risk of condensation or blooming on the surface of the applied product. Low temperatures and high humidity conditions increase the probability of blooming. Substrate Temperature | Minimum | +10 °C | | Maximum | +40 °C |
Pot Life | +10 °C | ~50 minutes | | +20 °C | ~25 minutes | | +30 °C | ~15 minutes |
Waiting Time / Overcoating | Substrate temperature | Minimum | Maximum | | +10 °C | ~36 hours | ~3 days | | +20 °C | ~16 hours | ~48 hours | | +30 °C | ~12 hours | ~24 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity. Applied Product Ready for Use | Temperature | Foot traffic | Light traffic | Full cure | | +10 °C | ~48 hours | ~3 days | ~7 days | | +20 °C | ~24 hours | ~2 days | ~5 days | | +30 °C | ~20 hours | ~1 days | ~3 days |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
