Chat
Shop
Sign in
0 Wishlist
  • Products
  • Sikafloor-221 W Conductive, Water-Based Conductive Epoxy Primer for Esd Floors, Interior, Black, 6 Kg

Sikafloor-221 W Conductive, Water-Based Conductive Epoxy Primer for Esd Floors, Interior, Black, 6 Kg

Product Code: PTG259.00139
Share

Sikafloor-221 W Conductive, Water-Based Conductive Epoxy Primer for Esd Floors, Interior, Black, 6 Kg

Product Code: PTG259.00139
Share
Sika
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read more

Sikafloor-221 W Conductive, Water-Based Conductive Epoxy Primer for Esd Floors, Interior, Black, 6 Kg

This combination does not exist.

Add to RFQ RFQ
    Product Image
    Sikafloor-221 W Conductive, Water-Based Conductive Epoxy Primer for Esd Floors, Interior, Black, 6 Kg

    0.00 € without VAT 0.0 EUR

    1.00 lei

    Add to Cart

    Epoxy Water-based Electrostatic Conductive Flooring Primer

    Sikafloor-221 W Conductive is a 2-part, epoxy, water-based, electrostatic conductive flooring primer with increased electrical resistance. It is part of the selected Sikafloor ECF and ECD flooring systems.

    • Water-based
    • Easy to apply
    • High electrostatic conductivity
    • Applied by roller
    Usage
    • As a conductive primer below Sikafloor electrostatic conductive floor coatings.
    • Flooring that needs to comply with the requirements of the standard VDE 100-600.
    Advantages
    • Water-based
    • Easy to apply
    • High electrostatic conductivity
    • Applied by roller
    Packaging

    Part A

    4,98 kg container

    Part B

    1,02 kg container

    Part A + B

    6 kg unipacks

    Refer to current price list for packaging variations.
    Colour

    Part  A - resin

    black, liquid

    Part B - hardener

    white, liquid   

    Final colour: black
    Technical Information
    Electrostatic Behaviour

    Typical Average Resistance to Ground:

    Rg ≤ 104 Ω*

    In Combination with a Sika Electrostatic Conductive Floor Covering:

    Rg ≥ 107 Ω ≤ 109 Ω*

    * Readings may vary, depending on ambient conditions (i.e. temperature, humidity, etc.) and measurement equipment.
    Application Information
    Mixing Ratio

    Part A : Part B = 83 : 17 (by weight)
    Ambient Air Temperature

    +10 °C minimum / +30 °C maximum
    Relative Air Humidity

    75 % maximum

     
    Dew Point

    Beware of condensation.
    The substrate and uncured applied floor material must be at least +3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
    Substrate Temperature

    +10 °C minimum / +30 °C maximum
    Substrate Moisture Content

    ≤ 4 % percentage by weight

    The following test methods can be used: Sika-Tramex Meter, CM-measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
    Pot Life

    Temperatures

    Time

    +10 °C

    ~120 minutes

    +20 °C

    ~90 minutes

    +30 °C~30 minutes
    Curing Time

    Before overcoating Sikafloor-221 W Conductive allow:

    Substrate Temperature

    Minimum

    Maximum

    +10 °C

    		26 hours7 days

    +20 °C

    		17 hours5 days
    +30 °C12 hours4 days

    Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
    Applied Product Ready for Use

    Temperature

    Foot Traffic

    +10 °C

    ~26 hours

    +20 °C

    ~13 hours

    +30 °C~8 hours

    Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Preview TDS
    Download TDS
    General Specifications
    Packaging Part A: 4.98 kg; Part B: 1.02 kg; Part A + B: 6 kg unipacks – Refer to current price list
    Chemical Base Water-based epoxy
    Usage Conductive primer for electrostatic flooring systems
    Application Method Roller
    Usage Area Interior
    Color Black
    Ambient Air Temperature +10 °C min. / +30 °C max.
    Storage Conditions The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.
    Curing Time N/A
    Working Time +10 °C ~120 minutes; +20 °C ~90 minutes; +30 °C ~30 minutes
    Density Part A: 1.15 kg/L; Part B: 1.09 kg/L; Mixed Resin: 1.14 kg/L
    Consumption 0,08–0,10 kg/m²
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products