Chat
Shop
Sign in
0 Wishlist
  • Products
  • Sika Poxicolor Primer HE NEW, Epoxy Primer for Corrosion Protection On Metal Surfaces, Exterior, Aluminium, 4 kg

Sika Poxicolor Primer HE NEW, Epoxy Primer for Corrosion Protection On Metal Surfaces, Exterior, Aluminium, 4 kg, Color: Red-Brown, Packing: 4 kg

Product Code: PTG276.00036
Share

Sika Poxicolor Primer HE NEW, Epoxy Primer for Corrosion Protection On Metal Surfaces, Exterior, Aluminium, 4 kg, Color: Red-Brown, Packing: 4 kg

Product Code: PTG276.00036
Share
Sika
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read more

Sika Poxicolor Primer HE NEW, Epoxy Primer for Corrosion Protection On Metal Surfaces, Exterior, Aluminium, 4 kg

This combination does not exist.

Add to RFQ RFQ
  • Color
  • Packing
Product Image
Sika Poxicolor Primer HE NEW, Epoxy Primer for Corrosion Protection On Metal Surfaces, Exterior, Aluminium, 4 kg

0.00 € without VAT 0.0 EUR

1.00 lei

Add to Cart

2-pack primer coat based on epoxy resin. Economically and high-performance corrosion protection also for manually de-rusted surfaces and surfaces prepared by high-pressure water jetting. Low solvent content according to Protective Coatings Directive of German Paint Industry Association (VdL-RL 04).

  • Surface tolerant
  • High layer thickness and diffusion resistance combined with very good surface wetting properties and adhesion result in a very high safety margin for good corrosion protection
  • Fast initial drying and full hardening
  • High-build application
  • Very economically due to high coverage
Usage
To be used in the Sika Pro-Tecta Cut-Edge Corrosion System. Tough hard, versatile overcoatable primer for corrosion protection on steel exposed to atmosphere. Especially suitable for use on surfaces where only manually de-rusting (wirebrushing or power tool cleaning) or high-pressure water jetting is feasible or economic.  
Advantages
  • Surface tolerant
  • High layer thickness and diffusion resistance combined with very good surface wetting properties and adhesion result in a very high safety margin for good corrosion protection
  • Fast initial drying and full hardening
  • High-build application
  • Very economically due to high coverage
Packaging

Sika Poxicolor® Primer HE NEW28kg, 14kg and 4kg net
Sika® Thinner EG25 Litres, 10 Litres and 3 Litres
SikaCor® Cleaner160 Litres and 25 Litres
Colour

Aluminium, sand-yellow and red-brown (mat.-no.: 694.01/02/06)
Technical Information
Chemical Resistance

Weathering, de-icing salts, oils and grease and short term exposure to fuels and solvents

Thermal Resistance

Dry heat up to + 100°C
Damp heat up to + 40°C
Application Information
Mixing Ratio

Components A : B

By weight88 : 12
Thinner

Sika® Thinner EG
If necessary max. 5% Sika® Thinner EG may be added to adapt the viscosity.
Product Temperature

Min. + 5°C
Relative Air Humidity

Max. 85 %, except the surface temperature is significantly higher than the dew point temperature, it shall be at least 3 K above dew point.

Surface temperature

Min. + 5°C
Pot Life
At + 5°C~6 hours
At + 20°C~4 hours
Drying stage 6
Dry film thickness 100 microns

+ 5°C after

12 hours

+ 20°C after6 hours
+ 30°C after

3 hours
Waiting Time / Overcoating

Min.: until drying stage 6 is achieved
Max.: 1 year
Drying time

Final drying time
Depending on layer thickness and temperature final hardness is achieved within 1 - 2 weeks

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.
Preview TDS
Download TDS

Specifications for Sika Poxicolor Primer HE NEW, Epoxy Primer for Corrosion Protection On Metal Surfaces, Exterior, Aluminium, 4 kg

Color Red-Brown or Sand-Yellow or Aluminum
Packing 4 kg or 28 kg or 14 kg
General Specifications
Packaging 4 kg
Chemical Base 2-pack primer coat based on epoxy resin
Usage Corrosion protection primer for de-rusted steel surfaces
Application Method Brush, roller or spray
Usage Area Exterior
Color Aluminium
Service Temperature +5 °C min. / +40 °C max.
Storage Conditions In originally sealed containers in a cool and dry environment
Density ~1.3 kg/l
Consumption ~0,194 kg/m2
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.

Recently viewed Products