Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sika Icosit KC 340/4, Polyurethane grout for tram baseplates, Exterior, Black, 6 kg

Sika Icosit KC 340/4, Polyurethane grout for tram baseplates, Exterior, Black, 6 kg

Cod produs: PTG040.00001
Share

Sika Icosit KC 340/4, Polyurethane grout for tram baseplates, Exterior, Black, 6 kg

Cod produs: PTG040.00001
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sika Icosit KC 340/4, Polyurethane grout for tram baseplates, Exterior, Black, 6 kg

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Sika Icosit KC 340/4, Polyurethane grout for tram baseplates, Exterior, Black, 6 kg

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    2-part polyurethane grout under discrete baseplates of tram / light rail tracks

    Sika® Icosit® KC 340/4 is a flexible two-part polymer grout based on polyurethane resin. It is designed as a vibration absorbing, load-bearing, flexible grout for the precision alignment of rails, turnouts / switches, etc. Sika® Icosit® KC 340/4 is also used for fixing track components to rigid substrates such as concrete slabs, steel bridge decks and tunnel invert slabs.

    • Medium axle loads of trams and light-rail vehicles.
    • Noise and vibration suppression.
    • Reduces erosion of concrete under baseplate.
    • More uniform load distribution into substructure.
    • Watertight undersealing.
    • Flexible, elastic (shore A 65).
    • Damping, compressible.
    • Good electrical insulation against stray currents.
    • No stress peaks on anchor bolts.
    • Excellent adhesion on various substrates.
    • Levels out tolerances.
    • Suitable as a powerful, shear-resistant adhesive.
    • Absorbs dynamic stresses and prolongs the life of concrete substructure.
    • Insensitive to moisture.
    • Long durability, less maintenance.
    Usage
    As a noise and vibration reducing grout under discrete baseplates of tramway or light rail track sections.  
    Advantages
    • Medium axle loads of trams and light-rail vehicles.
    • Noise and vibration suppression.
    • Reduces erosion of concrete under baseplate.
    • More uniform load distribution into substructure.
    • Watertight undersealing.
    • Flexible, elastic (shore A 65).
    • Damping, compressible.
    • Good electrical insulation against stray currents.
    • No stress peaks on anchor bolts.
    • Excellent adhesion on various substrates.
    • Levels out tolerances. 
    • Suitable as a powerful, shear-resistant adhesive. 
    • Absorbs dynamic stresses and prolongs the life of concrete substructure. 
    • Insensitive to moisture. 
    • Long durability, less maintenance. 
    Packaging

    Part A

    5,46 kg container

    Part B

    0,54 kg container

    A+B

    6 kg

    Refer to current price list for packaging variations.
    Colour

    Black
    Technical Information
    Shore A Hardness

    65 ± 5 (after 28 days)

    (ISO 868)

    Shore hardness assists with material identification and assessing the curing progress on site.

    Compressive stiffness

    Load-Deflection Diagram

    en_PNG_02-en-railfixing-icosit-KC-340-4-1200x900

    Static stiffness determined according to DIN 45673-1.

    Dimensions of test specimen 360 × 160 × 25 mm;

    Spring index kstat = 29 kN/mm, determined as per the secant method between 8 and 32 kN.

    Tensile Strength

    ~2,6 N/mm2

    (ISO 527)

    Electrical Resistivity

    ~1,22 × 109 Ω·m

    (DIN VDE 0100-610 and IEC 93)

    Service Temperature

    -40 °C minimum / +80 °C maximum

    short term +150 °C maximum

    Chemical Resistance

    Long-term resistant against:

    • Water
    • Most detergents
    • Sea water

    Temporary resistant against:

    • Mineral oils, diesel fuel

    Short-term or no resistance against:

    • Organic solvents (ester, ketone , aromates) and alcohol
    • Concentrated acids and lyes

    Contact Sika® Technical Services for specific information.
    Application Information
    Mixing Ratio

    Part A : Part B = 100 : 10 (parts by weight)
    Layer Thickness

    15 mm minimum 

    60 mm maximum
    Product Temperature

    Condition product parts before application preferably at ~+15 °C to assist with flow and curing speed
    Ambient Air Temperature

    +5 °C minimum / +35 °C maximum
    Relative Air Humidity

    90 % maximum
    Substrate Temperature

    +5 °C minimum / +35 °C maximum
    Substrate Moisture Content

    Dry to matt damp
    Pot Life

    ~11 minutes at +20 °C

    After this time, the mixture becomes unusable.

    Higher temperatures will shorten pot life.
    Curing Time

    Tack-free ~2 hours at +20 °C

    Trafficable ~12 hours at +20 °C
    Curing Rate

    Shore A Hardness Values at Different Curing Temperatures

    Curing Time

    0 °C

    5 °C

    23 °C

    35 °C

    1 Hour

    -

    -

    ~20

    2 Hours

    -

    -

    ~20

    ~35

    4 Hours

    -

    ~15

    ~30

    ~40

    7 Hours~25~25~40~50
    1 Day~40~40~50~55
    2 Days~45~45~55~60
    3 Days~50~50~60~60
    7 Days~55~55~60~60
    14 Days~55~55~60~60
    Waiting Time / Overcoating

    On primer or coating at +20 °C

    Minimum

    Maximum

    Icosit® KC 330 Primer

    1 hour

    3 days

    Sikadur®-32+24 hours7 days

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging 6 kg
    Chemical Base 2-part polyurethane grout
    Usage Noise and vibration reducing grout under discrete baseplates
    Usage Area Exterior
    Color Black
    Working Time 11 minutes
    Product Temperature +15 °C
    Application Thickness 15 mm >< 60 mm
    Ambient Air Temperature +5 °C min. / +35 °C max.
    Storage Conditions The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +10 °C and +25 °C
    Density 1.0 kg/l
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate