Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sika Armorex L2 High Flow, High-flow, fast-setting grout, Interior & Exterior, Grey, 25 kg

Sika Armorex L2 High Flow, High-flow, fast-setting grout, Interior & Exterior, Grey, 25 kg

Cod produs: PTG040.00002
Share

Sika Armorex L2 High Flow, High-flow, fast-setting grout, Interior & Exterior, Grey, 25 kg

Cod produs: PTG040.00002
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sika Armorex L2 High Flow, High-flow, fast-setting grout, Interior & Exterior, Grey, 25 kg

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Sika Armorex L2 High Flow, High-flow, fast-setting grout, Interior & Exterior, Grey, 25 kg

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    High Flow Rapid Strength Grout

    Sika® Armorex® L2 High Flow is a one part, high flow, rapid strength cementitious grout.

    • High strength
    • Shrinkage compensated
    • High flowability retention
    • Durable
    • Non metallic
    • Impressive track record
    • Quality assured factory blend
    • Chloride free
    • >40 N/mm2 in 24 hours
    Usage
    • For precision, high performance, grouting underneath machine bases, structural steelwork, etc
    • For grouting precast concrete units and anchor bars
    • Repairing concrete structures
    • Filling voids
    • For grouting thicknesses between 10 -100 mm
    • Steel reinforcement anchoring
     
    Advantages
    • High strength
    • Shrinkage compensated
    • High flowability retention
    • Durable
    • Non metallic
    • Impressive track record
    • Quality assured factory blend
    • Chloride free
    • >40 N/mm2 in 24 hours
    Packaging

    25kg bags
    Colour

    Grey powder
    Technical Information
    Compressive Strength

    Compressive Strength tested to BS 1881:Part 116:1983 - ambient temperature +20°C

    1 day

    3 days

    7 days

    28 days

    Pourable

    ~42MPa

    ~56MPa

    ~68MPa

    ~77MPa

    Flowable

    ~40MPa

    ~54MPa

    ~65MPa

    ~74MPa

    Fluid~25MPa~45MPa~60MPa~70MPa

    Modulus of Elasticity in Compression

    ~29 GPa

    Flexural Strength

    7 days

    28 days

    ~8MPa

    ~10.5MPa

    Ambient temperature +20°C

    Tensile Strength

    7 days

    28 days

    ~2MPa

    ~3.5MPa

    Ambient temperature +20°C

    Pull-Out Resistance

    Pull out (Dry)

    Displacement < 0.6mm at load of 75KN (BS EN 1504-6)

    Pull out (Wet)

    Displacement < 0.6mm at load of 75KN (BS EN 1504 -6)

    Ultimate Anchorage Bond Strength

    6.7 MPa

    Electrical Resistivity

    ~4.5 (K.ohm.cm)

    (Wenner Test)
    Application Information
    Layer Thickness

    10 mm min. / 100mm max
    Flowability

    Flow cone test

    5°C

    33 seconds

    20°C

    33 seconds

    Efflux times at fluid consistency
    Ambient Air Temperature

    +5°C min. / +25°C max.
    Substrate Temperature

    +5°C min. / +25°C max.

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging 25 kg
    Chemical Base Cement, selected fillers and aggregates, special additives
    Usage High performance grouting for machine bases, precast concrete, repairs (10-100mm)
    Usage Area Interior & Exterior
    Color Grey
    Working Time N/A
    Product Temperature 15 - 20 °C
    Application Thickness 10 mm >< 100 mm
    Ambient Air Temperature +5 °C min. / +25 °C max.
    Storage Conditions Store properly in dry conditions in undamaged and unopened original sealed packaging
    Density 2180 kg/m³
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate