MULTI-PURPOSE SELF LEVELLING COMPOUND Sikafloor®-122 Level Universal self levelling compound is a 1-part, ready to use, cement based floor leveller. Suitable for smoothing and levelling internal uneven rigid floors, prior to applying final wearing coverings such as carpets, sheet vinyl, lino, tiles, laminates and timber. - Self smoothing and highly fluid.
- Low shrinkage.
- Easy to apply by pump or manual application.
- 2-4 hours walk on time (+20 °C).
- Can be overlaid in approx. 8 hours (+20 °C).
- Maintains good workability and joint healing.
- Good surface appearance and hardness.
- Protein and formaldehyde free.
|
Usage Levelling/smoothing - Concrete.
- Sand/cement screeds (not anhydrite).
- Quarry tiles, terrazzo, ceramic tiles.
- Underfloor heating applications beneath heating cables/pipes.
Advantages - Self smoothing and highly fluid.
- Low shrinkage.
- Easy to apply by pump or manual application.
- 2-4 hours walk on time (+20 °C).
- Can be overlaid in approx. 8 hours (+20 °C).
- Maintains good workability and joint healing.
- Good surface appearance and hardness.
- Protein and formaldehyde free.
|
Technical Information Compressive Strength > 20 N/mm² (after 28 days / +20 °C) (EN 13892-2)
Flexural Strength > 5 N/mm² (after 28 days / +20 °C) (EN 13892-2)
Thermal Compatibility Suitable for use with underfloor heating systems (not for embedment).
|
Application Information Layer Thickness Featheredge to 6 mm Relative Air Humidity < 75 % max Substrate Temperature +5 °C min. / +35 °C max. Pot Life 20 minutes in conditions of +23 °C / 50 % r.h
The temperature will affect the pot life. Application at temperatures above
+23 °C will reduce the pot life and the working time. Temperatures below
+23 °C will increase the pot life and extend the working time. Waiting Time / Overcoating At +20 °C and 50 % relative humidity:
Foot traffic 2-4 hours
Cover ~8 hours Times are approximate and at +23 °C and 50 % r.h. and will be affected by changing substrate and ambient conditions, particularly the temperature and relative humidity. When overcoating Sikafloor®-122 Level Universal always ensure the moisture content has achieved the required value for the coating product, as the waiting time will vary with the application thickness and ambient humidity (refer to the top coat product data sheet). Applied Product Ready for Use Lightly serviceable ~ 24 hours
Fully serviceable ~ 7 days
Note: Times are approximate and will be affected by changing substrate and ambient conditions, particularly the temperature and relative humidity. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
