Chat
Produse
Autentificare
0 Favorite
  • Products
  • SikaTop Armatec-110 EpoCem, Rust protection and primer for concrete reinforcement, Interior & Exterior, Dark Grey, 20 kg

SikaTop Armatec-110 EpoCem, Rust protection and primer for concrete reinforcement, Interior & Exterior, Dark Grey, 20 kg

Cod produs: PTG042.00045
Share

SikaTop Armatec-110 EpoCem, Rust protection and primer for concrete reinforcement, Interior & Exterior, Dark Grey, 20 kg

Cod produs: PTG042.00045
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

SikaTop Armatec-110 EpoCem, Rust protection and primer for concrete reinforcement, Interior & Exterior, Dark Grey, 20 kg

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    SikaTop Armatec-110 EpoCem, Rust protection and primer for concrete reinforcement, Interior & Exterior, Dark Grey, 20 kg

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    Reinforcement Corrosion Protection and Bonding Primer

    SikaTop Armatec-110 EpoCem is a cementitious epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection.

    • Contains EpoCem technology - improved bonding agent
    • Extended open times for repair mortars
    • Compatible with most Sika MonoTop repair mortars
    • Excellent adhesion to concrete and steel
    • Contains corrosion inhibitor
    • Certified for application under dynamic load conditions
    • Good resistance to water and chloride penetration
    • High shear strength
    • Long pot life
    • Easy to mix
    • Can be brushed on or applied using spray gun
    Usage
    • Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9)
    • Suitable in concrete repair as corrosion protection for reinforcement.
    • Suitable as a bonding primer on concrete and mortar
     
    Advantages
    • Contains EpoCem technology - improved bonding agent
    • Extended open times for repair mortars
    • Compatible with most Sika MonoTop repair mortars
    • Excellent adhesion to concrete and steel
    • Contains corrosion inhibitor
    • Certified for application under dynamic load conditions
    • Good resistance to water and chloride penetration
    • High shear strength
    • Long pot life
    • Easy to mix
    • Can be brushed on or applied using spray gun
    Packaging

    20 kg: A (1.14 kg) + B (2.86 kg) + C (16 kg)
    Colour

    Mixed components dark grey

    Component A

    white liquid

    Component B

    colourless liquid

    Component C

    dark grey powder
    Technical Information
    Tensile Adhesion Strength

    ≥ 1.5 N/mm2 (MPa) (after 28 days)

    (EN 1542)

    Lap Shear Strength

    Pass

    Coefficient of Thermal Expansion

    ~18 x 10-6 1/K

    (EN 1770)

    Diffusion Resistance to Water Vapour

    μH2O ~500

    Corrosion Test

    Pass

    (EN 15183)
    Application Information
    Ambient Air Temperature

    +5 °C minimum; +30 °C maximum
    Substrate Temperature

    +5 °C minimum; +30 °C maximum
    Pot Life

    ~ 3 hours (at +20 °C)
    Waiting Time / Overcoating

    Maximum waiting time before application of repair mortar
    Sika repair mortars and non-fast setting concrete can be applied on SikaTop Armatec-110 EpoCem within a maximum time of:

    Temperature

    Maximum Waiting Time

    +5 °C

    6 hours

    +10 °C

    5 hours

    +20 °C2 hours
    +30 °C1 hour

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging 20 kg
    Usage Control of anodic areas, corrosion protection for reinforcement, bonding primer on concrete and mortar
    Usage Area Interior & Exterior
    Color Dark Grey
    Chemical Base Portland cement, epoxy resin, selected aggregates and additives
    Storage Conditions +5 °C to +25 °C - Store in original, unopened, undamaged packaging in dry conditions. Always refer to packaging
    Density 2.10 kg/L
    Application Thickness N/A
    Ambient Air Temperature +5°C >< +30°C
    Substrate Temperature +5°C >< +30°C
    Working time 15 minutes
    Waiting Time 15 minutes
    Consumption 2.0 kg/m²
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate