A medium Viscosity Formula for non-porous substrates. EVERBUILD STICK2 Superglue GP is a medium viscosity flash setting industrial grade adhesive based on advanced cyanoacrylate technology. For use on perfect fit surfaces where fast set is required. Bonds non-porous surfaces. Set time 10 to 15 seconds. - Flash setting formulation, bonds to most non porous surfaces in seconds.
- Fills gaps up to 0.1mm
- Single component adhesive
- 100% solvent free
- Economical in use
|
Usage EVERBUILD STICK2 Superglue GP is suitable for use on plastics, metals, PVCU and EPDM. Advantages - Flash setting formulation, bonds to most non porous surfaces in seconds.
- Fills gaps up to 0.1mm
- Single component adhesive
- 100% solvent free
- Economical in use
Solids100% activeFlash Point>85 °CImpact Strength1.8 - 2.0 N/mm2 (steel-steel ASTM 950)Refractive Index1.46 (cured adhesive)Hardness82 (Rockwell cured adhesive)Specific Resistance8 x 1012 Ohm/cm (cured adhesive)Dielectric Const.3.44 @ 1MHz (cured adhesive)Softening Point150 °CWorking Temps.-60 to +80°CSetting times 5-60 seconds (plastic to plastic) 2-20 seconds (rubber to rubber) 10-60 seconds (degreased metal to metal) Packaging 20g and 50g plastic bottle, packed in self merchandising display boxes. |
Technical Information Tensile Strength 28-32 N/mm2 (steel-steel ASTM D2095) Shear Strength 15-20 N/mm2 (steel-steel ASTM D1002) |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.