Sikagard-6470 S, Aerosol Stone Chip Protection, Exterior, 500 mL
SIKA
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read more| Sprayable fast curing stone chip protection coating in aerosol can Sikagard-6470 S is a fast-drying, rubber-based quick repair protective coating in an aerosol can with very good rust proofing and sound deadening properties. It is suitable for an effective protection against stone chip impacts to the vehicle body and convinces with an outstanding final performance. Thanks to its very good application properties, original textures can easily be reproduced.
| ||||||||||||||||||||||||||||||||
PRODUCT BENEFITS
UsageSikagard-6470 S is a spray applied anti-corrosion coating for quick repair of vulnerable, painted parts of vehicles such as door sills, wheel arches, front and rear aprons. It can also be applied as a sound-deadening product for example on wheel arches, etc.Sikagard-6470 S shows very good adhesion on different paints, metal primers, metals and PVC without any pre-treatment. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring adhesion and material compatibility. Packaging
| ||||||||||||||||||||||||||||||||
Typical Product Data
| ||||||||||||||||||||||||||||||||
Technical Information CHEMICAL RESISTANCE Sikagard-6470 S is resistant against water, seawater, salt spray, oil, bases and acids. The above information is offered for general guidance only. Advice on specific applications will be given on request. | ||||||||||||||||||||||||||||||||
Application Information Surface Preparation Surfaces must be clean, dry and free of rust, dust and grease. Bare metal must be pre-treated to enhance corrosion resistance (e.g. uncoated steel, etc). Application Shake can approx. 40 times before use. Cover adjacent surfaces prior the spray process. Hold the can in an upright position, spray at room temperature and from a distance of approx. 25 cm in an grid motion to build up a continuous coat. The product can be applied haze free and does not drip. Apply After use, invert can and spray in short bursts to clear nozzle. Removal Uncured Sikagard-6470 S can be removed from tools and equipment with Sika Remover-208 or another suitable solvent. Once dried, the material can only be removed mechanically. Hands and exposed skin shall be washed immediately using hand wipes such as Sika Cleaner-350H or a suitable industrial hand cleaner and water. Overpainting Sikagard-6470 S is over paintable after approximately 20 minutes with most commonly used conventional paint systems (incl. water based paint systems). Waiting time can be reduced by accelerated drying at max. 40°C. Due to the wide range of paints adhesion and compatibility tests are necessary. |