Skip to Content
  1. All Products
  2. Sika AnchorFix-1, 2-Component Polyester Anchoring Adhesive, Interior & Exterior, Light grey, 300 mL
Sika AnchorFix-1, 2-Component Polyester Anchoring Adhesive, Interior & Exterior, Light grey, 300 mL

Sika AnchorFix-1, 2-Component Polyester Anchoring Adhesive, Interior & Exterior, Light grey, 300 mL

Adhesives & Sealants
SIKA

Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.

Read more
https://www.polytrade.global/web/image/product.template/17370/image_1920?unique=ab4a244
You have already submitted a query for this product today.

This combination does not exist.

Contact Us
Preview TDS
Download TDS
General Specifications
Packaging 300 mL
Usage Anchoring Rods, Bolts In Concrete, Masonry
Usage Area Interior & Exterior
Color Light grey
Chemical Base N/A
Storage Conditions +5 °C to +25 °C - Store in sealed, undamaged packaging in dry conditions, protected from sunlight.
Density 1.63 kg/L
Service Temperature N/A
Application Time 10 - 15 min.
Curing Time 24 hours
Application Thickness 2 >< 3 mm
Application Method Gun
UV Resistant Yes
Moisture Resistant Yes
Mold Resistant No
Paintable Yes
Sealant Yes
Flexible Yes

Solvent and styrene free based, two-component polyester anchoring adhesive.

  • Fast curing
  • Standard guns can be used
  • Can be used at low temperatures
  • High load capacity
  • ETA Approval available
  • Non-sag, even overhead
  • Styrene-free
  • Low odour
  • Low wastage
Usage
As a fast curing anchoring adhesive for all grades of:
  • Rebars / reinforcing steel
  • Threaded rods
  • Bolts and special fastening systems
  • Concrete
  • Hollow and solid masonry
  • Hard natural stone*
  • Solid rock*
*  These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix-1 Adhesive must be tested by first applying Sika AnchorFix-1 Adhesive only to a sample area. Check in particular bond strength, surface staining and discolouration.  
Advantages
  • Fast curing
  • Standard guns can be used
  • Can be used at low temperatures
  • High load capacity
  • ETA Approval available
  • Non-sag, even overhead
  • Styrene-free
  • Low odour
  • Low wastage
Packaging
300 ml standard cartridge

12 cartridges per box

pallet: 75 boxes
Colour
Component A:white
Component B:black
Component A+B mixed:light grey
Technical Information
Compressive Strength

~60 N/mm2 (7 days, +20 °C)

(ASTM D 695)

Modulus of Elasticity in Compression

~3 500 N/mm2 (7 days, +20 °C)

(ASTM D 695)

Flexural Strength

~28 N/mm2 (7 days, +20 °C)

(ASTM D 790)

Tensile Strength

~12 N/mm2 (7 days, +20 °C)

(ASTM D 638)

Thermal Resistance

Long term

+50 °C

Short term (1–2 hours)

+80 °C

Glass Transition Temperature

+60 °C

(DIN EN ISO 6721-1)

Design Considerations

For details about adhesive anchoring design refer to the separate documentation provided: “Technical Documentation Sika AnchorFix-1” Ref: 870 43 01
Application Information
Mixing Ratio

Component A : component B = 10 : 1 by volume
Layer Thickness

3 mm max.
Sag Flow

Non-sag, even overhead
Product Temperature

Sika AnchorFix-1 must be at a temperature of between +5 °C and +40 °C for application.
Ambient Air Temperature

-10 °C min. / +40 °C max.
Dew Point

Beware of condensation.
Substrate temperature during application must be at least 3 °C above dew point.
Substrate Temperature

-10 °C min. / +40 °C max.
Curing Time
Temperature

Open time - Tgel

Curing time - Tcur

+30 °C4 minutes35 minutes

+25 °C – +30 °C

4 minutes40 minutes

+20 °C – +25 °C

5 minutes50 minutes
+10 °C – +20 °C6 minutes85 minutes
+5 °C – +10 °C10 minutes145 minutes
+5 °C18 minutes145 minutes
–10 °C 1 230 minutes24 hours

1   Minimum cartridge temperature: +5 °C

2   This application is not covered by the scope of the product ETA or any other approval.