Chat
Shop
Sign in
0 Wishlist
  • Products
  • EVERBUILD EpoxySET NF, Epoxy Adhesive & Bedding Compound, Interior & Exterior, Pale grey

EVERBUILD EpoxySET NF, Epoxy Adhesive & Bedding Compound, Interior & Exterior, Pale grey, Packing: 10 kg

Product Code: PTG254.00278
Share

EVERBUILD EpoxySET NF, Epoxy Adhesive & Bedding Compound, Interior & Exterior, Pale grey, Packing: 10 kg

Product Code: PTG254.00278
Share
EVERBUILD
Everbuild is a well-established brand under the Sika group, specializing in high-performance sealants, adhesives, fillers, and building chemicals. Known for its reliable and durable products, Everbuild caters to both professional tradespeople and DIY enthusiasts. The product range includes silicone sealants, acrylic fillers, foam sealants, and various specialty construction chemicals designed to meet the demands of modern construction and renovation projects across the UK and beyond.
Read more

EVERBUILD EpoxySET NF, Epoxy Adhesive & Bedding Compound, Interior & Exterior, Pale grey

This combination does not exist.

Add to RFQ RFQ
  • Packing
Product Image
EVERBUILD EpoxySET NF, Epoxy Adhesive & Bedding Compound, Interior & Exterior, Pale grey

0.00 € without VAT 0.0 EUR

1.00 lei

Add to Cart

Expoxy adhesive & bedding compound

EVERBUILD EpoxySET NF is an epoxy resin bedding compound which has been designed for use where a non-slumping type of epoxy bedding compound is required. It is a two-pack, fine aggregate filled, fast-curing material, ideal for a variety of bedding, gap filling and concrete repair applications. EVERBUILD EpoxySET NF is a stiff but easily workable compound that can be applied by either trowel, spatula or knife. It cures to give high mechanical properties typical of epoxy compounds. It is resistant to oils, greases, petroleum, salts, many acids and alkalis and most commonly met corrosive media. It does not shrink on curing, and is designed to be used when cured from 5 °C to 60 °C. Its impact resistance and mechanical strength is significantly greater than that of concrete.

  • High strength.
  • Non-slump.
  • Strong adhesion.
  • Chemical-resistant.
  • Impact-resistant.
  • Non-shrink.
  • Trowels to a smooth finish.
  • Supplied in pre-weighed units.
  • No primer required.
Usage
  • For surface repairs of fine cracks and spalls.
  • For gap-filling, grouting, bedding fixtures etc.
  • For repairs to arrises and edge pieces without the use of formwork.
  • Wherever a thixotropic epoxy mortar is required.
  • Repairing vertical honeycomb concrete in abutments or overhead repairs on soffits.
  • Fixing slip bricks to concrete.
  • Securing bolts into walls.
  • As a gap-filling adhesive.
  • Filling bolt pockets.
  • Bedding tiles.
  • Repairing concrete posts in situ.
 
Advantages
  • High strength.
  • Non-slump.
  • Strong adhesion.
  • Chemical-resistant.
  • Impact-resistant.
  • Non-shrink.
  • Trowels to a smooth finish.
  • Supplied in pre-weighed units.
  • No primer required.
Packaging

3 kg & 10 kg pails
Colour

Pale grey
Technical Information
Compressive Strength

≥ 15 MPa

Tensile adhesion strength

≥ 0.8 MPa (6.4 MPa)

Thermal Compatibility

≥0.8 MPa (Part 4 dry cycling)

Chemical Resistance

Most aqueous systems, raw sewage, urine ,fresh water, sea water, diluted & concentrated alkalis, diluted acids, mineral, vegetable and animal fats & ammonia.

Water Absorption

≤0.5 kg/m2h0.5 (capillary absorption)
Application Information
Layer Thickness

3 kg is sufficient to cover 1.1 m² at 1.5 mm thickness
Ambient Air Temperature

+5 °C to +40 °C
Pot Life

The pot life of this product is 1 hour / 30mins at 20 °C. Low temperatures will retard the cure. Do not apply below 4 °C.
Curing Time

Initial cure = 5 hours

Full cure = 3-5 days (@ 25 °C)

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.
Preview TDS
Download TDS

Specifications for EVERBUILD EpoxySET NF, Epoxy Adhesive & Bedding Compound, Interior & Exterior, Pale grey

Packing 10 kg or 3 kg
General Specifications
Packaging 3 kg
Usage Epoxy Repair Mortar For Cracks, Bolts, Tiles, Concrete
Usage Area Interior & Exterior
Color Pale grey
Chemical Base 2-component epoxy based mortar
Storage Conditions +5 °C to +35 °C (ideal: 15-20 °C) - Store in unopened containers in cool, dry conditions.
Density 1.80 g/cm³
Service Temperature N/A
Application Time 30 - 60 min.
Curing Time 12 - 24 hours
Application Thickness N/A
Application Method Trowel/Spatula
UV Resistant No
Moisture Resistant Yes
Mold Resistant N/A
Paintable No
Sealant Yes
Flexible No
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.

Recently viewed Products