Chat
Produse
Autentificare
0 Favorite
  • Products
  • EVERBUILD EpoxySET NF, Epoxy Adhesive & Bedding Compound, Interior & Exterior, Pale grey

EVERBUILD EpoxySET NF, Epoxy Adhesive & Bedding Compound, Interior & Exterior, Pale grey, Packing: 10 kg

Cod produs: PTG254.00278
Share

EVERBUILD EpoxySET NF, Epoxy Adhesive & Bedding Compound, Interior & Exterior, Pale grey, Packing: 10 kg

Cod produs: PTG254.00278
Share
EVERBUILD
Everbuild este un brand bine cunoscut din cadrul grupului Sika, specializat în produse de înaltă performanță pentru etanșare, adezivi, chituri și chimicale pentru construcții. Renumit pentru fiabilitate și durabilitate, Everbuild se adresează atât profesioniștilor, cât și pasionaților de proiecte DIY. Gama de produse include etanșanți pe bază de silicon, chituri acrilice, spume poliuretanice și diverse chimicale speciale destinate construcțiilor și renovărilor moderne, cu o prezență puternică în Regatul Unit și pe piețele internaționale.
Citește tot

EVERBUILD EpoxySET NF, Epoxy Adhesive & Bedding Compound, Interior & Exterior, Pale grey

Această combinație nu există.

Cere ofertă Cere ofertă
  • Packing
Product Image
EVERBUILD EpoxySET NF, Epoxy Adhesive & Bedding Compound, Interior & Exterior, Pale grey

0,00 € fără TVA 0.0 EUR

1,00 lei

Add to Cart

Expoxy adhesive & bedding compound

EVERBUILD EpoxySET NF is an epoxy resin bedding compound which has been designed for use where a non-slumping type of epoxy bedding compound is required. It is a two-pack, fine aggregate filled, fast-curing material, ideal for a variety of bedding, gap filling and concrete repair applications. EVERBUILD EpoxySET NF is a stiff but easily workable compound that can be applied by either trowel, spatula or knife. It cures to give high mechanical properties typical of epoxy compounds. It is resistant to oils, greases, petroleum, salts, many acids and alkalis and most commonly met corrosive media. It does not shrink on curing, and is designed to be used when cured from 5 °C to 60 °C. Its impact resistance and mechanical strength is significantly greater than that of concrete.

  • High strength.
  • Non-slump.
  • Strong adhesion.
  • Chemical-resistant.
  • Impact-resistant.
  • Non-shrink.
  • Trowels to a smooth finish.
  • Supplied in pre-weighed units.
  • No primer required.
Usage
  • For surface repairs of fine cracks and spalls.
  • For gap-filling, grouting, bedding fixtures etc.
  • For repairs to arrises and edge pieces without the use of formwork.
  • Wherever a thixotropic epoxy mortar is required.
  • Repairing vertical honeycomb concrete in abutments or overhead repairs on soffits.
  • Fixing slip bricks to concrete.
  • Securing bolts into walls.
  • As a gap-filling adhesive.
  • Filling bolt pockets.
  • Bedding tiles.
  • Repairing concrete posts in situ.
 
Advantages
  • High strength.
  • Non-slump.
  • Strong adhesion.
  • Chemical-resistant.
  • Impact-resistant.
  • Non-shrink.
  • Trowels to a smooth finish.
  • Supplied in pre-weighed units.
  • No primer required.
Packaging

3 kg & 10 kg pails
Colour

Pale grey
Technical Information
Compressive Strength

≥ 15 MPa

Tensile adhesion strength

≥ 0.8 MPa (6.4 MPa)

Thermal Compatibility

≥0.8 MPa (Part 4 dry cycling)

Chemical Resistance

Most aqueous systems, raw sewage, urine ,fresh water, sea water, diluted & concentrated alkalis, diluted acids, mineral, vegetable and animal fats & ammonia.

Water Absorption

≤0.5 kg/m2h0.5 (capillary absorption)
Application Information
Layer Thickness

3 kg is sufficient to cover 1.1 m² at 1.5 mm thickness
Ambient Air Temperature

+5 °C to +40 °C
Pot Life

The pot life of this product is 1 hour / 30mins at 20 °C. Low temperatures will retard the cure. Do not apply below 4 °C.
Curing Time

Initial cure = 5 hours

Full cure = 3-5 days (@ 25 °C)

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.
Vezi Fisa Tehnica
Descarca Fisa Tehnica

Specificatii pentru EVERBUILD EpoxySET NF, Epoxy Adhesive & Bedding Compound, Interior & Exterior, Pale grey

Packing 10 kg or 3 kg
General Specifications
Packaging 3 kg
Usage Epoxy Repair Mortar For Cracks, Bolts, Tiles, Concrete
Usage Area Interior & Exterior
Color Pale grey
Chemical Base 2-component epoxy based mortar
Storage Conditions +5 °C to +35 °C (ideal: 15-20 °C) - Store in unopened containers in cool, dry conditions.
Density 1.80 g/cm³
Service Temperature N/A
Application Time 30 - 60 min.
Curing Time 12 - 24 hours
Application Thickness N/A
Application Method Trowel/Spatula
UV Resistant No
Moisture Resistant Yes
Mold Resistant N/A
Paintable No
Sealant Yes
Flexible No
Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

Produse Recent Vizualizate