Chat
Shop
Sign in
0 Wishlist
  • Products
  • SikaBond Rapid DPM, Solvent-free Resin Primer and Damp Proof Membrane, Interior/exterior, Brown, 5 L

SikaBond Rapid DPM, Solvent-free Resin Primer and Damp Proof Membrane, Interior/exterior, Brown, 5 L

Product Code: PTG255.00029
Share

SikaBond Rapid DPM, Solvent-free Resin Primer and Damp Proof Membrane, Interior/exterior, Brown, 5 L

Product Code: PTG255.00029
Share
Sika
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read more

SikaBond Rapid DPM, Solvent-free Resin Primer and Damp Proof Membrane, Interior/exterior, Brown, 5 L

This combination does not exist.

Add to RFQ RFQ
    Product Image
    SikaBond Rapid DPM, Solvent-free Resin Primer and Damp Proof Membrane, Interior/exterior, Brown, 5 L

    0.00 € without VAT 0.0 EUR

    1.00 lei

    Add to Cart

    Solvent Free Resin Primer and Damp Proof Membrane for Cement Based Substrates

    SikaBond® Rapid DPM is a single part moisture curing polyurethane.

    • 1-part, ready to use.
    • Rapid drying (approx 45 minutes at 50 % r.h. & 20 °C).
    • Compatible with all SikaBond® wood floor adhesives.
    • Especially suited to refurbishment projects where old adhesive residues are present.
    • Suitable for underfloor heating.
    • Applied by roller or squeegee.
    Usage
    For priming, consolidating and sealing of:
    • Absorbent and non-absorbent sub-floors, consolidating weak cement screed and isolation of old adhesive residues.
    • Can be used as a Damp Proof Membrane on sub-floors not under hydrostatic pressure.
    • Can be used over underfloor heating. (Max 3 % moisture CM Method, 4.5 % Tramex).
     
    Advantages
    • 1-part, ready to use.
    • Rapid drying (approx 45 minutes at 50 % r.h. & 20 °C).
    • Compatible with all SikaBond® wood floor adhesives.
    • Especially suited to refurbishment projects where old adhesive residues are present.
    • Suitable for underfloor heating.
    • Applied by roller or squeegee.
    Skinning / Laying Time ~10-20 minutes (+20 °C  50 % r.h.) Sag Flow Consistency:
    Spreads easily when applied using brush, squeegee or short/medium pile roller
    Packaging

    5 L Jerry can.
    Colour

    Brown.
    Technical Information
    Service Temperature

    Up to + 35 °C

     

    Application Information
    Ambient Air Temperature

    Room temperature above +10 °C. Relative air humidity < 75 %.
    For ambient temperatures the standard construction rules are relevant.
    Relative Air Humidity

    Between 40 % and 75 %.
    Substrate Temperature

    During laying and until SikaBond® Rapid DPM has fully cured substrate temperature must be at least + 10 °C and in the case of underfloor heating < + 20 °C. For substrate temperatures the standard construction rules are relevant.
    Substrate Moisture Content

    Maximum substrate moisture content :

    • 4 % CM for cement screed (ca. 6 % Tramex / Gravimetric weight percent).
    • 0.5 % CM for anhydrite screed.
    • 3 - 12 % CM for magnesia flooring (proportion of organic parts).

    Maximum substrate moisture content in case of underfloor heating:

    • 3 % CM for cement screed (ca. 4.5 % Tramex / Gravimetric weight percent).
    • 0.3 % CM for anhydrite screed.
    • 3 - 12 % CM for magnesia flooring (proportion of organic parts).

    For moisture content and quality of substrates the guidelines of the wood floor manufacturer as well as standard construction rules must be observed. Please Note: Most wood floor manufacturers state a maximum substrate moisture content of 2 % CM (ca.2.5 % Tramex).
    Curing Time

    Approximately 45 minutes at 20 °C & 50 % r.h.

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Preview TDS
    Download TDS
    General Specifications
    Packaging 5 L
    Width mm
    Length m
    Weight Kg
    Usage For priming, consolidating and sealing of:Absorbent and non-absorbent sub-floors, consolidating weak cement screed and isolation of old adhesive residues.Can be used as a Damp Proof Membrane on sub-floors not under hydrostatic pressure.Can be used over underfloor heating. (Max 3 % moisture CM Method, 4.5 % Tramex)
    Chemical Base Polyethylene with curing agent, acrylic dispersion
    Usage Area Interior/Exterior
    Color Brown
    Storage Conditions Store in tightly closed undamaged original sealed containers, in dry conditions and protected from direct sunlight at temperatures between +5 °C and +25 °C
    Density 1.16 g/cm³
    Consumption Apply 1 coat at a minimum consumption of 100 – 200 g/m² (85-170 ml/m²).
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products