Chat
Produse
Autentificare
0 Favorite
  • Products
  • EVERBUILD FIX & FILL Expanding Foam, One-part, quick-setting polyurethane foam, Interior & Exterior

EVERBUILD FIX & FILL Expanding Foam, One-part, quick-setting polyurethane foam, Interior & Exterior, Packing: 500 mL

Cod produs: PTG039.00071
Share

EVERBUILD FIX & FILL Expanding Foam, One-part, quick-setting polyurethane foam, Interior & Exterior, Packing: 500 mL

Cod produs: PTG039.00071
Share
EVERBUILD
Everbuild este un brand bine cunoscut din cadrul grupului Sika, specializat în produse de înaltă performanță pentru etanșare, adezivi, chituri și chimicale pentru construcții. Renumit pentru fiabilitate și durabilitate, Everbuild se adresează atât profesioniștilor, cât și pasionaților de proiecte DIY. Gama de produse include etanșanți pe bază de silicon, chituri acrilice, spume poliuretanice și diverse chimicale speciale destinate construcțiilor și renovărilor moderne, cu o prezență puternică în Regatul Unit și pe piețele internaționale.
Citește tot

EVERBUILD FIX & FILL Expanding Foam, One-part, quick-setting polyurethane foam, Interior & Exterior

Această combinație nu există.

Cere ofertă Cere ofertă
  • Packing
Product Image
EVERBUILD FIX & FILL Expanding Foam, One-part, quick-setting polyurethane foam, Interior & Exterior

0,00 € fără TVA 0.0 EUR

1,00 lei

Add to Cart

One-part, quick-setting polyurethane foam

EVERBUILD® FIX & FILL is a quick-setting one-part polyurethane foam in aerosol form. FIX & FILL is supplied with attachable nozzles. The foam expands on application up to 150% its original volume. Once cured the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5°C to +30°C, ideally 20°C.

  • Quick setting - can be cut, sawn or plastered in 1 hour.
  • Economical in use - expands up to 55 times its original volume.
  • Fills irregular and broad gaps where most conventional fillers would fail.
  • Possesses insulating and sound deadening properties.
Usage
Filling
  • Gaps around pipe entries through walls
  • Gaps around window frames, door frames
  • Electrical wire chasing prior to plastering
  • Deep joints prior to applying sealant or plaster
  • Irregular gaps in stone, brick, concrete or plaster
Fixing     
  • Door frames
  • Timber structures
  • Window sills and thresholds
  • Window frames
Insulating
  • Behind cladding to exterior walls
  • Behind soffit and barge boards
 
Advantages
  • Quick setting - can be cut, sawn or plastered in 1 hour.
  • Economical in use - expands up to 55 times its original volume.
  • Fills irregular and broad gaps where most conventional fillers would fail.
  • Possesses insulating and sound deadening properties.
Expansion 41 litres (750ml can) 27 litres  (500ml can)   Cell Structure Medium fine Full Load Bearing Stability App, 24 hours (30mm bead) Working Temps5°C - 30°C. (Optimum 20°C)Temp Res Of Cured Bead Long Term:  -40 to +80°C Short Term: -40 to +100°CBuilding Material ClassB3
Packaging

500ml and 750ml aerosol
Technical Information
Compressive Strength

2.4-3.1N/cm² (DIN 53427) at 10% stress.

Tensile Strength

4.4-9 N/cm² (DIN 53430)

Shear Strength

4.1-4.7 N/cm² (DIN 53427)

Water Absorption

0.3 Vol % (DIN 53433)

Thermal Conductivity

0.04 W/Mk (DIN 52612)
Application Information
Cutting Time

~150 mins for 30mm
Tack Free Time

~10 minutes

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.
Vezi Fisa Tehnica
Descarca Fisa Tehnica

Specificatii pentru EVERBUILD FIX & FILL Expanding Foam, One-part, quick-setting polyurethane foam, Interior & Exterior

Packing 500 mL or 750 mL
General Specifications
Packaging 500 mL
Chemical Base N/A
Usage Fills and insulates gaps around pipes, frames, and behind cladding
Usage Area Interior & Exterior
Color N/A
Application Method Direct from tub
Ambient Air Temperature +5 °C min. / +30 °C max
Storage Conditions Store upright between 10°C and 20°C. Pressurized container. Protect from sunlight and do not expose to temperatures above 50°C. Do not pierce or burn the can even after use. Store as flammable liquid.Note: Elevated temperatures will reduce shelf life dramatically.
Density N/A
Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

Produse Recent Vizualizate